PVC Floor Mats from Clean Power
PVC is the material behind most of our wet-area, entrance and modular mats. We extrude, mold and weld PVC in our own factory, so every mat below can be produced in custom sizes, thicknesses and colors.
Jlean B
The Jlean B Modular Floor Mat is made from eco-friendly PVC with strong resistance to acids, alkalis, and UV exposure.
Jsmart-A
The Jsmart-A modular entrance mat is built with a durable PVC base and optional nylon or polypropylene surfaces.
Baza
The Baza PVC Mat is made from 100% pure PVC raw material, offering excellent UV resistance, strong elasticity, and long-lasting durability.
Swimming Pool Sheet Mat Non Slip Drainage PVC Flooring
The Swimming Pool Sheet Mat uses eco-friendly PVC with a slatted structure for effective drainage, non-slip safety, and durability in poolside and outdoor wet areas.
Baya
Shower tube mats feature a hollow drainage design that allows water to flow through easily.
Rook
The Rook Entrance Mat features a spiral grid surface that efficiently removes dust and debris from shoes.
Stair Treads And Landing Mat For Full Staircase Protection
Modular PVC stair treads and landing mats with carpet inlays, spliced to fit any staircase.
Outdoor Rubber Stair Mats For Wet Weather And Heavy Use
Heavy-duty modular stair mats with a three-in-one scraping surface for wet, high-traffic exterior steps.
What Is a PVC Floor Mat?
A PVC floor mat is made from polyvinyl chloride, a durable plastic that can be made soft and flexible or firm and rigid depending on the formulation. In matting it is used in two ways: as the whole mat, such as hollow drainage mats, slatted sheet mats and interlocking tiles, and as the backing for textile entrance mats, where a PVC base keeps nylon or polypropylene fibers stable and waterproof. PVC mats are often sold as vinyl floor mats, since vinyl is the common name for the same material.
Why Choose PVC Mats?
- Waterproof: PVC does not absorb water, so it will not rot, swell or grow mold inside the material.
- Slip-resistant textures: PVC can be molded into ribs, studs, grids and scraper profiles that grip wet shoes and bare feet.
- Drainage designs: hollow, tube and open-grid structures let water fall through, keeping the walking surface dry.
- Chemical and UV resistance: suitable formulations resist acids, alkalis, cleaning chemicals and sunlight.
- Light and easy to handle: PVC mats roll up or lift out for cleaning and are cheaper to ship than heavy rubber.
- Color and customization: PVC can be produced in almost any color and cut, welded or interlocked to any size.
Types of PVC Floor Mats
| Type | Construction | Best for |
|---|---|---|
| Hollow tube mats | Welded PVC tubes with open spaces for drainage | Showers, changing rooms, pool decks |
| Slatted sheet mats | Flexible PVC sheets with drainage slots | Pool surrounds, bathrooms, wet corridors |
| Modular interlocking tiles | Clip-together PVC tiles, sometimes with brush or carpet inserts | Entrances, wet areas, large or irregular floors |
| Coil and spiral grid mats | Looped PVC filaments bonded into a springy mat | Scraper mats at outdoor and indoor entrances |
| PVC-backed textile mats | Nylon or polypropylene fibers on a PVC backing | Lobbies, corridors, elevator areas |
| PVC stair treads | Modular PVC treads with scraper or carpet inlays | Entrance steps and stairwells |
PVC vs Rubber Floor Mats
| Factor | PVC | Rubber |
|---|---|---|
| Water resistance | Excellent, fully waterproof | Excellent |
| Oil and grease | Good with the right formulation | Best with NBR rubber |
| Cushioning | Moderate | High |
| Cold weather | Can stiffen in severe cold | Stays flexible |
| Weight | Light | Heavy |
| Colors | Very wide range | Limited |
| Typical cost | Lower | Higher |
For oily industrial floors and long standing shifts, rubber is often the better choice. See our rubber floor mats page for NBR anti-fatigue and anti-slip options.
How to Choose a PVC Mat
Wet or dry area?
For showers, pools and wash areas, choose an open drainage design so water never sits on the surface. Our wet-area floor mats are built for exactly this. For entrances, choose a scraper surface or a PVC-backed textile mat that traps dirt and moisture.
Bare feet or shoes?
Barefoot areas need a softer surface with rounded edges and good drainage. Shoe traffic can take firmer, more aggressive scraper profiles.
Indoor, outdoor or both?
For exterior use, choose UV-resistant PVC and an open structure that sheds rain. For entrance steps, see our non-slip stair treads.
Size and layout
Rolls and sheets suit long corridors, while interlocking floor mats fit irregular rooms and can be extended or repaired tile by tile.
Cleaning PVC Floor Mats
PVC mats are easy to maintain: sweep or hose off debris, wash with a neutral detergent and a soft brush, rinse and let the mat dry before replacing it. In wet areas, lift the mat regularly so the floor underneath can be cleaned and dried. Our guide on cleaning commercial floor mats covers routines for different mat types.
Custom PVC mats: we produce PVC mats in custom colors, thicknesses, sizes and logo designs, with test reports available for export markets. See our custom floor mat service.
Frequently Asked Questions
Are PVC floor mats slippery when wet?
Not when they have a textured or drainage surface. Smooth PVC can be slippery, which is why safety mats use ribs, studs and open grids.
Is PVC the same as vinyl?
Yes. Vinyl is the common name for PVC (polyvinyl chloride). “Vinyl floor mats” and “PVC floor mats” usually describe the same material.
Can PVC mats be used outdoors?
Yes, if the PVC is UV-stabilized. Many of our PVC entrance and drainage mats are designed for indoor and outdoor use.
Are your PVC mats environmentally safe?
Our PVC mats are made from eco-friendly, odor-free formulations, and we can provide test reports such as RoHS and REACH for export markets on request.
Direct from Manufacturer
Our own factory — not a trading company
Clean Power is a vertically integrated manufacturer with our own production facility, R&D team, and quality control lab. Every mat is produced, inspected, and shipped directly from our factory — no middlemen, no markup, full control over quality and lead time.
Our factory operates advanced PVC extrusion and rubber molding lines, electronic welding systems for PVC tube mats, and precision die-cutting for grid and sheet mat products. With a production capacity of over 50,000 m² per month, we handle everything from sample orders to full-container bulk shipments.
From inquiry to delivery in 5 steps
Full-service support for commercial buyers
We serve hotels, resorts, restaurants, contractors, architects, distributors, and facility management companies worldwide.
ISO Certification
Get your free quote
in 24 hours
Tell us which PVC mat you need — we’ll respond with a tailored solution, pricing, and free samples within one business day.
Office Address
Dezhou Yirun Environmental Protection Technology Co., Ltd.
Workshop 13, Yard 12, Chuangye Rd, Yunhe Street Office
Decheng District, Dezhou City, Shandong Province
China 253000
Email Address
Phone
Monday – Friday, 9:00 AM – 6:00 PM (GMT+8)
Available via call, WhatsApp, or WeChat.
Connect Socially
