Outdoor Floor Mats Built for Industrial Sites
Loading docks, factory entrances, yard walkways and outdoor work platforms take rain, mud, grit, oil and forklift-side foot traffic every day. Clean Power manufactures outdoor floor mats for these conditions in PVC, rubber, modular tiles and aluminum, all produced in our own factory and cut or assembled to your size.
Basy
PVC industrial mat with a double-sided blade surface and a sand-scraping top layer for strong grip and dirt removal.
Bara
Reinforced double-blade workshop mat with excellent dirt removal and non-slip safety for demanding sites.
Baza
100% pure PVC mat with excellent UV resistance and elasticity, waterproof and easy to hose clean.
Sulan
Textured NBR rubber surface with drainage channels for grip in wet or oily conditions.
Jsmart-A Tire Tread
Interlocking pure PVC entrance tiles for heavy-traffic outdoor entrances of any size or shape.
Rest
Heavy-duty modular brush mat fully covered with scraping brushes for maximum dirt removal.
Lvast A-Type
Modular aluminum alloy mat with snap-on connections for high-traffic commercial and industrial entrances.
Yay
Spiral grid PVC scraper mat that knocks dirt and debris off footwear before it reaches the building.
Why Outdoor Industrial Areas Need Dedicated Mats
Most of the dirt, water and debris inside a factory or warehouse is carried in from outside. Outdoor mats at the edge of the building do three jobs:
- Scrape: aggressive surfaces remove mud, gravel, metal chips and snow from boots before workers step inside.
- Drain: open or channelled structures let rain and washdown water pass through so the walking surface stays drier.
- Grip: raised textures and stable backings reduce slips on wet concrete, ramps and steel platforms.
Keeping walking surfaces clean and free of hazards is part of OSHA’s walking-working surfaces standard, and outdoor matting is one of the simplest controls to put in place at doors, docks and walkways.
Types of Outdoor Floor Mats
| Type | Best for | Key strengths |
|---|---|---|
| PVC blade and grid mats | Factory entrances, walkways, workshop doors | Scraping, drainage, UV resistance, easy hose-down cleaning |
| Outdoor rubber floor mats | Wet or oily outdoor work zones, ramps, platforms | Grip in wet and oily conditions, weight that stays in place |
| Modular interlocking tiles | Large or irregular entrances, loading areas | Any size or shape, single damaged tiles can be replaced |
| Aluminum entrance systems | Main staff and visitor entrances | Permanent installation, very high traffic, long service life |
| Spiral grid scraper mats | Secondary doors, covered outdoor entries | Low cost, quick to clean, effective first scraping zone |
Compare the base materials in our guides to PVC floor mats, rubber floor mats and aluminum floor mats.
Outdoor Rubber Floor Mats vs PVC Mats
Outdoor rubber floor mats are heavy, flexible and grippy, which makes them a good fit for wet, oily outdoor work areas and sloped surfaces where a mat must not move. NBR rubber such as our Sulan mat also resists oils, so it suits areas next to machinery or vehicle bays. PVC outdoor mats are lighter, highly UV resistant and easy to hose down, and their blade or grid structures are designed to scrape and drain. Many sites use both: PVC scraper mats at the outer edge and rubber or modular mats in the working zone.
Where to Use Outdoor Mats on an Industrial Site
Factory and warehouse entrances
Place a scraper or modular mat outside every staff door, followed by indoor wiper matting. Our entrance mats page and the guide to entrance matting systems explain how to size each zone.
Loading docks and yards
Use drainage-friendly PVC or rubber mats where workers step on and off trucks. For dock edges and ramps, choose mats with strong grip and keep forklift routes clear. See our warehouse matting solutions.
Outdoor walkways and platforms
Open-grid and blade mats keep walkways passable in rain. Our drainage mats and interlocking floor mats can cover long runs without gaps. Read more about how drainage mats work.
Outdoor steps
Steps leading to offices and plant buildings are a common slip point. Add matching non-slip stair treads and see our guide to outdoor stair treads.
How to Choose Outdoor Floor Mats
- Start with the contamination: mud and grit need scraping surfaces, standing water needs drainage, oil needs NBR rubber.
- Check the traffic: heavy foot traffic and trolleys call for modular PVC, rubber or aluminum rather than light fiber mats.
- Plan the size: cover the full width of the door or walkway and give workers several steps on the mat.
- Think about cleaning: open structures can be lifted and hosed; modular tiles can be removed one by one.
- Consider visibility: custom colors and logo mats can mark entrances and safety zones.
For more ideas, read which floor mats are best for high-traffic outdoor areas and our article on modular floor mats for outdoor use.
Cleaning and Maintenance
Hose PVC and rubber mats regularly, lift them to clear debris trapped underneath, and inspect edges for curling. Replace worn modular tiles individually. Our guide to maintaining and cleaning commercial floor mats covers each material.
Frequently Asked Questions
What is the best outdoor floor mat for industrial use?
For most industrial entrances and walkways, a PVC blade or grid mat that scrapes and drains is the best starting point. Choose NBR rubber where oil is present and aluminum for permanent, very high-traffic main entrances.
Are outdoor rubber floor mats waterproof?
Yes. Rubber does not absorb water, and mats with drainage channels let water run off the walking surface.
Can outdoor mats be made to a custom size?
Yes. We cut mats to size, assemble modular tiles to any layout, and can add custom colors or logos.
Do you supply outdoor mats for distributors and contractors?
Yes. We supply samples, project quantities and private-label packaging directly from our factory.
Direct from Manufacturer
Our own factory — not a trading company
Clean Power is a vertically integrated manufacturer with our own production facility, R&D team, and quality control lab. Every mat is produced, inspected, and shipped directly from our factory — no middlemen, no markup, full control over quality and lead time.
Our factory operates advanced PVC extrusion and rubber molding lines, electronic welding systems for PVC tube mats, and precision die-cutting for grid and sheet mat products. With a production capacity of over 50,000 m² per month, we handle everything from sample orders to full-container bulk shipments.
From inquiry to delivery in 5 steps
Full-service support for commercial buyers
We serve hotels, resorts, restaurants, contractors, architects, distributors, and facility management companies worldwide.
ISO Certification
Get your free quote
in 24 hours
Tell us about your outdoor work area — we’ll respond with a tailored solution, pricing, and free samples within one business day.
Office Address
Dezhou Yirun Environmental Protection Technology Co., Ltd.
Workshop 13, Yard 12, Chuangye Rd, Yunhe Street Office
Decheng District, Dezhou City, Shandong Province
China 253000
Email Address
Phone
Monday – Friday, 9:00 AM – 6:00 PM (GMT+8)
Available via call, WhatsApp, or WeChat.
Connect Socially
